Monster Paint Clear Spray-On Traction for Stand Up Paddle Boards

"Ultra-Lite * Super Clear * Nose Riding Grip"

"Endorsed by Gerry Lopez: "I recommend Monster Paint, the non-slip clear texture coating that brilliantly shows the manufactures label, Hawaiian Prints, Airbrush Colors, Pin Line and even any stick-on Logos. Don't worry about slipping off ever again."

"Surface Coverage: 1 spray can will coat 2 Boards and 2 Paddles"

Chuck Patterson says:
"The most versatile “Extreme Sports”
pro athlete on the planet! Winner of the
First Annual Rainbow Sandals
“Gerry Lopez” Battle of the Paddle."

Clean Clear Spray Traction That Lasts!
The Ultimate
“Nose riding” traction
ultra-lite - super clear
spray-on grip

*Where can I use Monster Paint Traction?

Use Monster Paint Traction for "Nose Riding" on Longboards, SUP Board and the Paddle Shaft for "Hand Grip".

For Sailboard, Kiteboard, Wakesurfing, Towboard, Skimboard and Skateboards.

Use on Shortboards as a wax base coat for killer wax bumps and "Hand Grip" for unreal big air tricks.

*How many boards will 1 Spray Can of Monster Paint Traction cover?

Surface coverage (using 3 coats each) is 3 Boards or 2 boards and 2 paddles.

*What surfaces can I apply Monster Paint Traction?

Epoxy, Fiberglass, Gloss Coat and Sand Finish, Gelcoat, Wood, Carbon Fiber, Aluminum, and most other surfaces.

*How do I apply Monster Paint Traction?

Clean surface of all dirt, wax, oil, etc.
Spray from a distance of 18" inches using smooth even strokes. Apply 3 lite coats to build up the clear texture for long lasting traction. For more details see directions on back of the can or go to “Chuck's Application Tips” link at Home Page.

*How do I clean the surface area prior to appling Monster Paint Traction?

Prep the surface using a Surf Wax Remover or lacquer thinner, and paper towels. All wax, oil, and dirt must be removed to insure proper adhesion.

*What is the minimum temperature I can apply Monster Paint Traction?

Apply when the temperature is 50*F (12*C) minimum, 90*F (32*C) maximum.

*How long does it take to dry?

Dry to the touch in 1 hour. Hard Cure time @ 77*F is 18 hours, Over Night cure is recommended.

*Can Monster Paint Traction be used as a Wax Base Coat?

For Longboards and Shortboards use as a base coat for killer wax bumps and "Hand Grip" for unreal big air tricks.

*What’s the best way to keep Monster Paint Traction clean?

Clean Monster Paint Traction with dish soap and water. Scrub with a kitchen brush and rinse soap off thoroughly with clean water.

*What can I do to remove Surf Wax from Monster Paint Traction?

Use a citrus based Surf Wax Remover. It will remove the wax but not the Monster Paint Traction.

*How long will Monster Paint Traction last?

A 3-coat appliction cleaned and applied properly, allowed 18 hours or more cure time will last for 8 months or more before a touch-up coat is needed.

*How can I remove Monster Paint Traction competely from my board?

To remove Monster Paint Traction from the surface of your boards deck or paddle shaft use a Lacquer Thinner, or fine sand paper.

*What kind of guarantee does Monster Paint Traction have?

Monster Paint Traction comes with a 30-day money back guarantee. (Click on the “SHIPPING & RETURNS” link for complete details). Because application and conditions vary, and are beyond our control, we are not responsible for results obtained in using this product, even when used as suggested. The user should conduct tests to determine the suitability of the product for the intended use (including liability for breach of warranty, strict liability in tort, negligence or otherwise) is limited exclusively to replacement of the product or refund of its price. Under no circumstances are we liable for incidental and consequential damages.